Skip to content
English
Sign in
Go to www.blueprintengines.com
  • There are no suggestions because the search field is empty.

BP302CT / BP302RCT Series

Horsepower & Torque: 361 Horsepower / 334 ft. lbs. Torque Cylinder Heads: BluePrint Engines Aluminum Cylinder Heads Compression Ratio: 9.4:1 Camshaft: Hydraulic Roller Cam - .533 Intake / .544 Exhaust Lift and 215 Intake / 220 Exhaust Duration @ .050 - 114° LSA Pistons: Hypereutectic Crankshaft: Cast Crank - 3.000" Stroke and 5.090" Rods Fuel Recommendation: 87+ Octane

Description:

  • Horsepower & Torque: 361 Horsepower / 334 ft. lbs. Torque
  • Compression Ratio: 9.4:1
  • BluePrint Engines Aluminum Heads
  • BluePrint Engines Hydraulic Roller Cam
  • BluePrint Engines Cast Crank
  • BluePrint Engines Hypereutectic Pistons

Block:

  • BluePrint Engines High Strength Cast Iron Block
  • Increased Deck Thickness and Strength Webbing
  • Priority Main Oiling
  • 4.000" Bore
  • 4-Bolt Main
  • 1-Piece Rear Main Seal
  • Improved Water Jacket Design

Rotating Assembly:

  • Cast Crank
  • 3.000" Stroke
  • OEM Type 5.090" Connecting Rods
  • Hypereutectic Pistons
  • 50oz Externally Balanced Front and Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - HP9008
  • 60cc Chamber
  • 2.02" Intake / 1.60" Exhaust Valves
  • 190cc Intake / 60cc Exhaust Runners

Cam Specs:

  • Hydraulic Roller Cam
  • .533 Intake / .544 Exhaust Lift
  • 215 Intake / 220 Exhaust Duration
  • @.050-114 Degree Lobe Separation

Ignition Timing:

  • 10-16 Degrees Initial, 32-34 Total

Also Includes:

  • Front Sump Oil Pan
  • Valve Covers
  • Timing Cover
  • Dipstick

Notes:

  • Engine timing cover is designed for standard rotation water pump and pulley kit ONLY.
  • This engine is an excellent cruiser and daily driver engine. This engine makes up to 13 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel

 

Engine Accessory Specifications

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. 

Part Number: BP302CT

Fuel Delivery Type: Carbureted, 600cfm **Not included**

Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug)

Spark Plug Gap: .035"

Harmonic Balancer: BPP50 - 50 Ounce, 6.4" Diameter

Flexplate/Flywheel: 50 Ounce Weighted

Stall Converter: OEM-1800 rpm

Intake Manifold: Dual plane (not included)

Fuel Recommendation: 87+ Octane Approved

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,3,7,2,6,5,4,8

Notes: Not for EGR - Engine requires a V-belt standard rotation water pump and belt system.  

Recommended Break in Oil: BPP710 (Click Here)

Recommended Service Oil: BPP10W30 (Click Here)

Recommended Oil Filter: BPP21085 or BPP51515 (Click Here)

Total Oil capacity with production oil pan, and Correct Filter: 5 Quarts