Skip to content
English
  • There are no suggestions because the search field is empty.

BP327CT Series

Horsepower & Torque: 350 Horsepower / 350 ft. lbs. Torque Cylinder Heads: BluePrint Engines Aluminum Cylinder Heads Compression Ratio: 9.4:1 Camshaft: Hydraulic Roller Cam - .495 Intake / .502 Exhaust Lift and 220 Intake / 224 Exhaust Duration @ .050-114° LSA Pistons: Hypereutectic Crankshaft: Forged Crank - 3.250" Stroke and Forged 5.700" Rods Fuel Recommendation: 87+ Octane

Overview:

The Blueprint Engines 327ci crate engine combines classic muscle with modern performance, dyno-tested at 350 Horsepower / 350 ft. lbs. Torque. Housed in a one-piece rear main seal BluePrint Engines High Strength Cast Iron 4-bolt main Block with a 4.000″ bore and 3.250" Stroke, it features high-quality internals like a .495 Intake / .502 Exhaust Lift and 220 Intake / 224 Exhaust Duration @ .050-114° LSA, hypereutectic pistons, forged crank, forged 5.700" Connecting Rods, and Blueprint’s aluminum heads sporting 64cc chambers and raised ports.

Description:

  • Horsepower and Torque: 350 Horsepower / 350 ft. lbs. Torque
  • Compression Ratio: 9.4:1
  • BluePrint Engines Aluminum Heads
  • BluePrint Engines Hydraulic Roller Cam
  • BluePrint Engines Forged Crank
  • BluePrint Engines Hypereutectic Pistons

Block:

  • BluePrint Engines High Strength Cast Iron Block
  • Drilled and Tapped for Clutch Linkage
  • Mech Fuel Pump Provision: Yes
  • Passenger Side Dipstick
  • 1-Piece Rear Main Seal
  • 4-Bolt Main
  • 4.000" Bore

Rotating Assembly:

  • BluePrint Forged Crankshaft
  • 3.250" Stroke
  • Hypereutectic Pistons
  • Forged 5.700" Connecting Rods w/ 150,000 PSI Bolts
  • Internally Balanced Front - Externally Balanced Rear 

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - H8002K
  • 64cc Chamber
  • 2.02" Intake / 1.60" Exhaust Valves
  • 195cc Intake / 75cc Exhaust Runners

Cam Specs:

  • Hydraulic Roller
  • .495 Intake / .502 Exhaust Lift
  • 220 Intake / 224 Exhaust Duration
  • @ .050-114 Degree Lobe Separation

Ignition Timing:

  • 32 - 34 Degrees Total at 3500 RPM

Also Includes:

  • Holley Brawler 670cfm Vacuum Secondary Carburetor w/ Electric Choke - BPP67256
  • Under Header Spark Plug Wires (Perfect for Rams Horn exhaust manifolds)
  • BluePrint Tach Drive Pro Billet Ready Run Distributor - BPP3503TDBK
  • Aluminum Intake Manifold - BPP350VINT
  • Thermostat Housing - BPP10108470
  • Mechanical Fuel Pump - BPP61073
  • Premium Vintage Valve Covers
  • Premium Vintage Air Cleaner
  • 6.75-inch Harmonic Balancer
  • Thermostat - BPP180TS
  • Timing Cover
  • Spark Plugs
  • Oil Pan

Notes:

  • Not for use in pollution-controlled vehicles.

Engine Accessory Specifications

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. 

Part Number: BP327CTCV

Fuel Delivery Type: Carbureted

Spark Plug: BPP7938 NGK 7938 BKR5E (.750-inch reach, 14mm thread, 5/8 hex, plug)

Spark Plug Gap: .035"

Harmonic Balancer: BPP350 - Non-Weighted, 8" Diameter

Flexplate/Flywheel: Late 350 Weighted

Stall Converter: 1800 - 2200 rpm

Intake Manifold: Dual Plane, Satin Aluminum

Fuel Recommendation: 87 Octane Approved

Timing (Initial/Total Advance): Initial Timing 10-16° and Total Timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Recommended Break in Oil: BPP710 (Click Here)

Recommended Service Oil: BPP10W30 (Click Here)

Recommended Oil Filter: BPP51061 (Click Here)

Total Oil Capacity with Production Oil Pan, and Filter: 5 Quarts