Skip to content
English
Sign in
Go to www.blueprintengines.com
  • There are no suggestions because the search field is empty.

BP3479CT  / BP3479RCT Series

Horsepower & Torque: 415 Horsepower / 415 FT. LBS. Torque Cylinder Heads: BluePrint Engines Aluminum Cylinder Heads Compression Ratio: 10:1 Camshaft: Hydraulic Roller Cam - .543 Intake / .554 Exhaust Lift and 218 Intake / 226 Exhaust Duration @ .050 - 112° LSA Pistons: Forged Crankshaft: Cast Crank - 3.400" Stroke and Forged 5.400" Rods Fuel Recommendation: 91+ Octane Approved

Description:

  • Horsepower & Torque: 415 Horsepower / 415 FT. LBS. Torque
  • Compression Ratio: 10.0:1
  • BluePrint Engines Aluminum Heads
  • BluePrint Engines Cast Crankshaft
  • BluePrint Engines Hydraulic Roller Cam

Block:

  • BluePrint Engines High Strength Cast Iron Block
  • Increased Deck Thickness and Strength Webbing
  • Priority Main Oiling
  • 4.000" Bore
  • 4-Bolt Main
  • 1-Piece Rear Main Seal
  • Improved Water Jacket Design

Rotating Assembly:

  • Cast Crankshaft
  • 3.400" Stroke
  • Forged 5.400" Connecting Rods
  • Forged Pistons
  • 28oz Externally Balanced Front and Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - HP9009
  • 60cc Chamber
  • 2.02" Intake / 1.60" Exhaust Valves
  • 190cc Intake / 60cc Exhaust Runners

Cam Specs:

  • Hydraulic Roller Cam
  • .543 Intake / .554 Exhaust Lift
  • 218 Intake / 226 Exhaust Duration
  • @.050-112 Degree Lobe Separation

Ignition Timing:

  • 10-16 Degrees Initial, 32-34 Total

Also Includes:

  • Front Sump Oil Pan
  • Valve Covers
  • Timing Cover
  • Dipstick

Notes:

  • Engine timing cover is designed for standard rotation water pump and pulley kit ONLY.

 

Engine Accessory Specifications

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. 

Part Number: BP3479CT

Fuel Delivery Type: Carbureted, 670cfm **Not Included**

Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug)

Spark Plug Gap: .035"

Harmonic Balancer: BPP28 - 28 Ounce, 6.4" Diameter

Flex plate/Flywheel: 28 Ounce Weighted such as BPP529618, BPPF28164, BPPF157T28

Stall Converter: 2000-2400 rm

Intake Manifold: Dual plane (not included)

Fuel Recommendation: 91+ Octane Approved

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,3,7,2,6,5,4,8

Notes: Not for EGR - Engine requires a V-belt standard rotation water pump and belt system.  

Recommended Break in Oil: BPP710 (Click Here)

Recommended Service Oil: BPP10W30 (Click Here) 

Recommended Oil Filter: BPP21085 or BPP51515 (Click Here)

Total Oil capacity with production oil pan, and Correct Filter: 5 Quarts