Skip to content
English
Sign in
Go to www.blueprintengines.com
  • There are no suggestions because the search field is empty.

BP350CT Series

Horsepower & Torque: 341 Horsepower / 371 ft. lbs. Torque Cylinder Heads: BluePrint Engines Aluminum Cylinder Heads Compression Ratio: 9.2:1 Camshaft: Hydraulic Roller Cam - .477 Intake / .471 Exhaust Lift and 202 Intake / 212 Exhaust Duration @.050-115° LSA Pistons: Hypereutectic Crankshaft: Cast Crank - 3.480" Stroke and 5.700" Rods Fuel Recommendation: 87+ Octane

Description: 

  • Horsepower & Torque: 341 Horsepower / 371 ft. lbs. Torque
  • Compression Ratio: 9.2:1
  • BluePrint Engines Aluminum Heads
  • BluePrint Engines Hydraulic Roller Cam
  • BluePrint Engines Cast Crankshaft
  • BluePrint Engines Hypereutectic Pistons

Block:

  • BluePrint Engines High Strength Cast Iron Block
  • Manufactured and Machined in the USA!
  • Drilled and Tapped for Clutch Linkage
  • Mech Fuel Pump Provision: Yes
  • Passenger Side Dipstick
  • 1-Piece Rear Main Seal
  • 4-Bolt Main
  • 4.000" Bore

Rotating Assembly:

  • Cast Crankshaft
  • 3.480" Stroke
  • Forged 5.700" Connecting Rods
  • Hypereutectic Pistons
  • Internally Balanced Front - Externally Balanced Rear 

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - H8002K
  • 64cc Chamber
  • 2.02" Intake / 1.60" Exhaust Valves
  • 195cc Intake / 75cc Exhaust Runners

Cam Specs:

  • Hydraulic Roller
  • .477 Intake / .471 Exhaust Lift
  • 202 Intake / 212 Exhaust Duration
  • @.050-115 Degree Lobe Separation

Ignition Timing:

  • 32 Degrees Total at 3500 RPM

Also Includes:

  • Valve Covers - BPP9518
  • Rear Sump Oil Pan
  • Timing Cover
  • Dipstick

Notes:

  • This engine is an excellent cruiser and daily driver engine.  This engine makes up to 18 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel
  • The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM. 

    Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. 

     

     

     

Engine Accessory Specifications

Part Number: BP350CT

Fuel Delivery Type: (Not Included) Recommend 600cfm Carburetor BPP080457SA

Spark Plug: BPP7938 NGK 7938 BKR5E (.750-inch reach, 14mm thread, 5/8 hex, plug)

Spark Plug Gap: .035"

Harmonic Balancer: (Not Included) Recommend BPP350 - Non-Weighted, 8" Diameter

Flexplate/Flywheel: (Not Included) Recommend Late 350 Weighted BPP871006

Stall Converter: Stock

Intake Manifold: (Not Included) Recommend BPP350VINT

Fuel Recommendation: 87 Octane Approved

Timing (Initial/Total Advance): Initial Timing 10-16° and Total Timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Recommended Break in Oil: BPP710 (Click Here)

Recommended Service Oil: BPP10W30 (Click Here) 

Recommended Oil Filter: BPP51061 (Click Here)

Total Oil Capacity with Production Oil Pan, and Filter: 5 Quarts