Skip to content
English
  • There are no suggestions because the search field is empty.

What Are the Basic Specifications for the Discontinued BluePrint BP3475CTC?

 Basic Specifications
  • Displacement: 347 CID
  • Block: 302-based roller block, .040" over
  • Rear Main Seal: One-piece
  • Bore: 4.040"
  • Crankshaft: Cast steel, one-piece rear-main-seal configuration
  • Balance: 28.4 oz external balance, front and rear
  • Connecting Rods: SCAT 2-1CR5400-927 or YFI CR5400B
  • Pistons: Silv-O-Lite 9971.040 or WD-07975
  • Compression Ratio: 9.9:1
  • Camshaft: 4062YB hydraulic roller
  • Cam Timing: 108° intake centerline
  • Lifters: Hydraulic roller
  • Cylinder Heads: HP9009 aluminum
  • Head Gaskets: Fel-Pro 9333PT-1
  • Rocker Arms: COMP Cams 17044-1
  • Pushrods: COMP Cams 7621-1
  • Intake Manifold: Edelbrock 7521
  • Carburetor: Holley 0-80457SA, vacuum secondary with electric choke
  • Distributor: MSD 8579
  • Oil Pump: Melling M68HV
  • Oil Pan: Canton 15-610, front-sump seven-quart system
  • Oil-Pump Pickup: Canton 15-611
  • Dipstick and Tube: Canton 20-850
  • Harmonic Balancer: Professional Products 80006, 28.4 oz
  • Firing Order: 1-3-7-2-6-5-4-8
  • Minimum Dyno Rating: 415 HP / 400 lb-ft
 

Frequently Asked Questions

Is the BP3475CTC internally or externally balanced?

The BP3475CTC is externally balanced at both the front and rear using a 28.4 oz balance specification. Use compatible flywheel or flexplate and harmonic-balancer components.

What head gasket does it use?

The original BOM specifies Fel-Pro 9333PT-1 head gaskets, quantity two.

What camshaft does it use?

The engine uses the 4062YB hydraulic roller camshaft, installed at 108° intake centerline.

What oil pan does it use?

The BP3475CTC uses a black Canton 15-610 front-sump oil pan with a Canton 15-611 pickup and 20-850 dipstick.

What carburetor was originally installed?

The original carburetor is a Holley 0-80457SA with vacuum secondaries and an electric choke