Skip to content
English
  • There are no suggestions because the search field is empty.

What Valve Length Is Used in BluePrint PS8015 Cylinder Heads?

 What Valve Length Does the PS8015 Use?

The PS8015 cylinder head uses +.100" longer-than-standard valves.When sourcing replacement intake or exhaust valves for a PS8015, verify that the replacement valve is specified as +.100" length for the applicable LS valve.What Size Valves Are Used in the PS8015?The PS8015 uses:

  • Intake valve diameter: 2.165"
  • Exhaust valve diameter: approximately 1.600"
  • Valve length: +.100"
  • Valve angle: 12°
  • Maximum valve lift: .650"
Always verify the complete valve dimensions before ordering replacement components.Why Is the +.100" Valve Length Important?Valve length affects several areas of the valvetrain, including:
  • Valve spring installed height
  • Spring pressure
  • Retainer position
  • Rocker arm geometry
  • Pushrod requirements
  • Available valve lift
Installing a standard-length valve in place of the specified +.100" valve can change the intended valvetrain geometry and spring setup.What Should I Check When Replacing PS8015 Valves?Do not select a replacement valve based only on valve-head diameter.Verify:
  • +.100" valve length
  • Correct intake or exhaust diameter
  • Valve stem diameter
  • Keeper/lock groove configuration
  • Valve spring installed height
  • Retainer and lock compatibility
  • Rocker geometry and pushrod length after assembly
Pushrod length and valvetrain geometry should always be checked when cylinder-head or valvetrain components are changed.Frequently Asked Questions